Shaking Almond Trees: When to Start
The start of shaking almond trees will soon begin in California, as well as the rest of the northern hemisphere. This process utilizes a piece of equipment which clamps to the tree and applies a vibrational force. This energy is transferred to the nut. The vibration moves the nut, which causes the tissues to disconnect at the abscission layer. Nuts then fall to the ground to finish the drying process.
As the nut matures, a few physiological changes occur. Maximum nut weight for ‘Nonpareil’ occurs sometime around the first week of August. Prior to this point, kernel weight is accumulating as the sugars are turning into fats and proteins within the kernel. This conversion is what gives the kernel weight after drying. As this is happening, the abscission layer forms between the nut and the peduncle (also known as the separation zone). As the nut continues to mature, moisture within the hull will decrease and the abscission layer will become more apparent.
Generally, nuts become easier to shake as they mature, butthis isn’t always the case. Increased fertility and irrigation rates haveincreased the variability of ripening. Also, certain varieties (‘Independence,’‘Padre,’ ‘Wood Colony,’ ‘Price’ and ‘Monterey’ to name a few) are difficult toshake due to the incomplete formation of the abscission layer or the structureof the tree’s canopy. Diseases or toxicities (e.g. Hullrot and boron toxicity)may also make it difficult to remove nuts as gumming may cause the nuts tostick to the tree. Lastly, hull-tights, or nuts in which the hull hascompletely dried may not be easily removed due to the lack of weight during theshaking process. These factors will increase the mummy counts within the trees,requiring poling or a second harvest, or a more effective sanitation program.
Due to these factors, an earlier harvest should beconsidered. This shake-timing should occur after the completion of kernelweight accumulation but before the hull completely dries. The moisture withinthe hull can help with nut removal as the increased mass can lead to an easierseparation. Shaking earlier will require a longer period of drying on theground.
Ideally, shaking should begin when 100% of the nuts have are1/2 to 2/3rds of the way split and the hull is still green (stage d, figure 1).This is the point of maximum weight accumulation. However, many farmers havefound that beginning to harvest slightly earlier provides a cleaner shake,which removes more nuts and reduces harvesting expenses, leading to a greateryield and more income. This timing is when all the nuts have reached an openingof 1/4-1/2” (8-12 mm) (stage c, figure 1). The first-to-open nuts will probablybe fully open and dried.
Wanting to shake earlier will require a bit more work. Priorto the start, test shakes should occur across the orchard after nuts hit thetargeted stage. When shaking removes 99% of the nuts from the test trees, beginthe harvesting process. Test trees should represent both the greener and drierareas of the orchard. If bark damage is observed, stop shaking and wait acouple of days before resuming the process.
Harvesting early has several trade-offs. Navel Orangewormdamage will be less since moths prefer to lay eggs on split nuts in the tree.Generally, sanitation requirements will be less due to better nut removal.Hull-rot will be less since the infected hull will translocate less acid intothe tree. On the other hand, a longer dry time will also lead to a greater exposurefor ant feeding/damage. Irrigation management is more challenging due to nutsbeing spread across the orchard floor for a longer period of time (A singlesweep pass could be useful to remove nuts from the drip-lines). Foreignmaterial may be higher due to the increase of hull dry-down on the orchardfloor. Finally, and most importantly, bark damage may be increased since barkstrength increases through the month of August and September.
The timing of shaking trees at harvest depends on a varietyof factors. When timed correctly, it will lead to an increase in nut removaland smoother farm operations. The earliest harvest should start when 100% ofthe nuts split a 1/4-1/2". At this timing, some nuts will be fully split,while others will still have moisture in the hull. The added weight from thehulls helps with removal. Starting early has trade-offs which should beconsidered for the farm operation. Finally, remember to conduct test shakesprior to determine the percentage of nut removal and bark damage occurrence,and if needed, delay shaking by a fewdays.